AUDI B5- AUDI 2.7 Single Turbo Kit

AS SEEN ON THE NET FROM PB5

-A simple kit that allows fitting of a rear mounted single turbocharger, whilst still keeping the factory firewall in-tact on the B5 S4 & C5 A6/AR

Units were designed for usage of PTE (Precision) Vband Turbine Housings & the Tial 44mm MVR wastegate (standard Tial 44mm will not fit!). 
Please choose your supporting mods accordingly! 
*Designed to bolt up to Audi N/A 2.8 30V Exhaust Manifolds  

-TIG welded 321 Stainless construction all around 
-2" Up-Pipe Manifold (2x Primary O2Bungs/plugs w/ EGT's deleted) 
-1.75" Atmospheric Dumptube 
-3.5" 2-Part Downpipe (Additional O2Bung for WBO2, both secondaries/plugs)

*Please understand with the initial converting to a STK setup you need to expect re-routing, re-wiring, minor clearancing of intake manifold, heat shielding odds/ends, etc etc. This is a basic kit to provide the essentials needed for one to "ditch the twins." 

We believe simplification is key in regards to maintaining/keeping a happy healthy 2.7 and strongly advocate the STK conversion.