XS-POWER IS PROUD TO RELEASE TO THE PUBLIC
2.3 Turbo powered Mustang, SVO, or Thunderbird Turbo Coupe
2.3L Turbo Stainless Steel Tubular Race Header Version XS-P
Ford 2.3L Turbo Manifold, Turbo Coupe, Stang, Merkur
CUSTOM T3.T4 CENTER MOUNTED TURBO FLANGE
35.38 MM WASTEGATE FLANGE
BRACED FLANGE ON BOTH SIDES
High flow stainless steel center mount header featuring equal length 1 5/8" primaries and 1/2" machined flanges.
New header orientation allows for removal of the turbo in less than 15 minutes.
Will accept all turbos with a T3 style 4 hole rectangular flange.
This is not a direct stock replacement. No provision for EGR.
Accessories are available below. (Must use a braided flex section in external wastegate dump tube that routes wastegate back into
downpipe).
Specs:
-One Piece Equal Length 1.625" Primaries
-0.065" Wall Thickness
-0.50" Flange Thickness
-High Flow Merge Collector
-T3 Style Turbo Flange
-35-38mm External Wastegate Flange (~3.45x1.75" w/1.30" center hole) Dimensions:
-Total Width (Exc. WG Flange): 8.0"
-Total Width (Inc. WG Flange): 9.75"
-Total Height: 8.0" Includes:
-Flange Gasket
-Turbo Gasket
-Wastegate Gasket
-Turbo Studs/Nuts, Wastegate Bolts/Nuts
-Additional Bracing on Wastegate Flange and Heavy Duty Welds on All Braces.