XS-POWER

STAINLESS UPGRADED DOWNPIPE

EVO-X

This Downpipe is set up to externally dump your internal waste gate.
Lots of Noise and Horsepower will be gained from simply bolting this
on you're stock Evolution X, Let alone pairing it with additional
Modifications.  You may be aware that this downpipe can be transformed
into a few setups like running an external wastegate, or simply
dumping the factory wastegate back into the down pipe. The listed
downpipe will only allow the dump of the stock internal gate 

The divorced and transformable 3" stainless O2 housing and downpipe
assembly for 2008 and up Mitsubishi Evolution X (10) is a much higher
flowing replacement for stock restrictive cast iron exhaust elbow and
small diameter downpipe just before the cat. This unit bolts right up
to the stock turbo and facilitates a greater amount of exhaust flow
out of the turbine while reducing the amount of turbulance in the erea
near the turbine wheel discharge. The result is much quicker boost
response throughout all gears, big gains in torque and much higher HP
all the way through redline. Even when mated to the stock exhaust
system, we saw huge gains due to the increased exhaust flow. We also
saw lower EGT's which above and beyond the power and torque gains, can
increase reliability on the EVO X engine.