Loading... Please wait...

Our Newsletter

XS POWER TURBO MS3 - FMIC Intercooler Kit Mazda Mazdaspeed 3

  • Image 1
  • Image 2
  • Image 3
  • Image 4
Calculated at checkout

Product Description

2007-2009 Mazdaspeed3 1st Gen with Double Core intercooler
The leading cause of inconsistent horsepower output from your Mazdaspeed 3 MZR, 2.3 DISI powerplant is due to inconsistent air intake temperatures. When you drive your MS3 hard, the tiny stock Top Mount Intercooler quickly becomes heat soaked. Intake temps rise quickly and power output drops off accordingly. Sure, you could replace your stock TMIC with an aftermarket TMIC that is slightly larger than the stock TMIC, but that only delays the inevitable heat soak that comes from having a small intercooler core that is positioned smack on top of your hot engine. So what's a MS3 owner to do?

XS-POWER Front Mount Intercooler Kit For 2007-2009 Mazdaspeed3 1st Gen with Double Core intercooler
Intercooler + Pipings + Silicon Hoses + Clamps + BOV + Brackets

Bar & Plate Intercooler
Bottom Core Thickness=4 inch
Total Height=12 inch
Inlet & Outlet=2.5 inch

This Kit Features XS-POWER's Innovated and Latest Double Core Intercooler Technology - Maximizing Cooling Core Size While Still Keeping the Factory Bumper Support and the other OEM Factory Parts
This Offers the Most Efficient and Largest Cooling Capacity without Cutting or Removing Other Parts so even home DIY can share
in mod's

Double Core Intercooler Utilizes All Available Space under the Bumper Support Bar and the Space Between the Bumper Support and AC Condenser Unit.

Intercooler is 4 inchThick Bottom and 1.75 inchThick Top. 2.5 inch Inlet and Outlet.

Piping Kit is 2.5 inch.

This XS-POWER kit is Excellent for Performance Gain + Cooling. It is a complete new design from Ground up
It is simple and easy to install.

Note: you will Need to Cut and Extend Power Steering Cooling Tube.
This Kit Comes with SS Braided Lines and Clamps. See the attached Pictures.

All Aluminum polished 2.0mm thick pipes, matching Intercooler inlet and outlet size, provides the best air flow from Turbo to Throttle body.
Includes all Silicon hoses and Stainless Steel T-Clamps for ALL joints.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the XS POWER TURBO MS3 - FMIC Intercooler Kit Mazda Mazdaspeed 3 to your wish list.

You Recently Viewed...